Panasonic Diga DMR-EZ48VEB Operating Instructions Manual

Contents

20RQT9126Programmes are automatically copied onto the disc from the location ofplayback at the time when the copying of the tape starts.[VHS] ¼ [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]Copying Titles (VHS ¼ DVD)Preparation: Turn on the television and select the appropriate video input to suit theconnections to this unit. [RAM] If the disc is protected, release protection (¼ 60). Insert a disc with enough space for recording. Select the DVD recording mode (¼ 24). Insert the video cassette containing the programme to be copied. Press [ PLAY] to play the video cassette and then press and hold[STTL ] for about 5 or more seconds to select the audio type you wishto record. Stop the tape at the point where you want to start copying from.Tips Dividing a title to be copiedWhen copying from VHS to DVD, titles on the DVD are divided according to index signalsdetected on the tape.− Titles that are too short may not be divided correctly.− The recording time may become longer than the original title depending on the number ofindex signals. To cancel copying in the middlePress [ STOP].− You can also press and hold [RETURN] for about 3 or more seconds to cancel copying inthe middle.However, you cannot stop fi nalising after it has started.PLAYto copy without fi nalising.− If you press [ STOP], you can cancel copying.On the main unitWhile both DVD and VHS are stoppedCOPYINGCOPYINGPress and hold for about3 seconds.RECto copy and automatically fi nalisewhen done (see page 61 for more information on fi nalising).− If you press [ STOP], you can cancel copying.− or −Notes If copying doesn’t complete due toshortage of remaining time, discspace, or other reasons, fi nalisingwon’t start. When copying doesn’t start, the“COPYING” indicator on the main unitblinks for about 7 seconds. Check ifthe unit is properly prepared.[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]STATUAA SDIRECT TV RECEXT LINKREC MODERECCREATAA ECHAPTERFUNCTIONMENUDIRECTNAVAIGATAAORGUIDERETURNPLAYPAPP USESTOPSLOW/SEARCHCHSELECTINPUT0987654321CHAVAADRIVESELECTVOLDELETE MANUAL SKIPPROG/CHECKEXITOKOPTIONTRACKING/V-LOCK/PAGESKIP/ INDEXRESETREW FFCOPYINGCOPYINGCOPYING indicator− Check if copying starts properly (“COPY” lights on the unit’s display).− Copying is automatically completed when the tape reaches its end or thedisc becomes full.Copying TitlesRefer to “Copying Titles (Advanced)” (¼ 54–57) for detail information oncopying.