Panasonic Diga DMR-EZ48VEB Operating Instructions Manual

Contents

68RQT9126VHS and System SettingsFUNCTIONMENU (¼ 62, Accessing the Setup Menu)All factory default settings are indicated with “Underlined” text.To Others SetupOthersRemote Control (¼ 80)[DVD 1] [DVD 2] [DVD 3]Clock (¼ 12)Owner ID (¼ 11)In order to prevent another person from using this unit if it isstolen, you can set a PIN number and input your personalinformation.Once the PIN number has been set, you cannot return to thefactory preset. Make sure not to forget this. PIN number Name House No. PostcodePower Save[On] [Off]Refer to the following when “Power Save” is set to “On”. Power consumption is minimized when the unit is turned off(¼ 94). Startup of the unit becomes slower compared to when “PowerSave” is “Off”. When the unit is off, satellite programmes cannot be watchedon the TV because the signal from the satellite receiverconnected to AV2 input terminal of this unit is not loopedthrough. To watch them, turn on the unit. (¼ 11)System UpdateIn order to update this unit, the TV Guide download, and supportsystem changes made by broadcasts, this unit periodicallyperforms software updates. Press [OK] to show the following settings. Update data and TV Guide download information are sent by anunscheduled digital broadcast. In order to receive these updates,you must be able to receive digital broadcasts. An update will take approximately 60 minutes. While the update isin progress, “SW-DL” appears on the unit’s display.You cannot operate the unit until the update is complete.Removing the AC mains lead while the update is in progress maydamage the unit. An TV Guide download will take approximately 30 minutes.While the TV Guide download is in progress, “GUIDE” appears onthe unit’s display. The TV Guide download can be interrupted byswitching on the unit. To avoid hearing the startup sound of System Update for theunit, perform the following steps.– Select the time for Software Update (¼ below, TV Guide/Software search period).– Set “TV Guide Download in Standby” and “Software Updatein Standby” (¼ below) to “Off”, and update manually(¼ below, Software Update Search Now).TV Guide Download in Standby[On] When the unit is turned off, TV Guide data isdownloaded automatically.[Off]Software Update in Standby[On] You can perform the unit updates automatically whenthe unit is turned off.[Off]TV Guide/Software search periodSelects the time to automatically perform TV Guide downloadand updates when the unit is turned off. This can only be setwhen “TV Guide Download in Standby” and “Software Update inStandby” is set to “On”. If there is a programmed recording set for the time you haveselected, the programmed recording will be given priority.[Automatic] The unit will give priority to searching for updatedata at midnight.[02:00–06:00] [06:00–10:00] [10:00–14:00][14:00–18:00] [18:00–22:00] [22:00–02:00]Software Update Search NowStart the search for new software manually.A new software version is announced by a message. Do notswitch your unit off during the update. This could result in theloss of data. A message shows that the update has fi nished. If anew software version is not going to be broadcast until the nextfew days, a corresponding message also appears. If applicable update data is found, press [, ] to select“Yes” and press [OK].InitializePress [OK] to show the following settings.Shipping ConditionThis returns Setup Menus to default settings, except for theratings level, ratings password, Owner ID and Clock setting.[Yes] [No] The timer recording programmes are also cancelled.Default SettingsThis returns Setup Menus to default settings, except for theprogrammed channels, time settings, disc language settings,ratings level, ratings password, Owner ID and remote control code.[Yes] [No]VHSTape LengthSet the length of the tape you are using so the unit can show thecorrect remaining time.[Auto (E-240)] The VHS automatically distinguishes E30, -60,-90, -120, -180, and -240 tapes.[E-195] For E195 tape[E-260] For E260 tape[E-300] For E300 tapeSQPBTo play back video cassettes recorded in S-VHS format (SQPB;S-VHS Quasi Playback)[Automatic] This unit automatically detects the format inwhich the recording was made and selects thesame format for playback. However, picturedistortion may appear.Therefore, set to [On] or [Off].[On] Use this setting when playing back a cassettetape recorded in the S-VHS format.[Off] Use this setting when playing back a cassettetape recorded in the VHS format only.,  select “VHS” ¼  ¼ ,  select item¼ OKSetupPictureSoundDisplayConnectionVHSTuningOthers RETURNSELECTTABDiscTape Length Auto (E-240)AutomaticSQPB,  select “Others” ¼  ¼ ,  select item¼ OKSetupPictureSoundDisplayConnectionVHSTuningOthers RETURNSELECTTABDiscClockRemote Control DVD 1Owner IDOnPower SaveSystem UpdateInitialize