- 147 -Preparations before using [Baby Monitor]1 Check if the wireless access point is compatible with IEEE802.11b/g/n.2 Install the smartphone application “Image App” on your smartphone. (l 167)3 Set up a Wi-Fi connection between this unit and the wireless access point.≥ [Easy Connection (WPS)] (l 170)≥ Searching for wireless access points to set up a connection (l 171)≥ Setting up a connection manually (l 172)4 When the Wi-Fi connection is complete, follow the procedure in “Using [BabyMonitor]”.≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with thesmartphone application “Image App”. (l 169)Using [Baby Monitor]≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in[Wi-Fi Setup] (l 170 to 173).1 Press Wi-Fi button on this unit.2 Touch [Baby Monitor] on the Wi-Fi menu screen.≥ The SSID of the wireless access point to which this unit is connected is displayed.3 Connect the smartphone to a wireless access point.≥ To connect it, select the SSID of the wireless access point displayed on the screen of this unit.4 Start up the smartphone application “Image App”.≥ When this unit is connected to the Internet via the wireless access point, the notification function,which sends notifications from this unit to the smartphone, becomes available.≥ When the connection to this unit is complete, the screen of this unit turns off. To turn on thescreen again, touch the screen.To exit [Baby Monitor]:Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.
