- 172 -6 Touch the wireless access point to connect.≥ If you touch [Refresh], you can search for wireless access points again.≥ If you touch and select a wireless access point, all characters will be displayed. In thiscase, touch [OK].≥ When no wireless access points are displayed, refer to “Setting up a connection manually”.(l 172)≥ If an Encryption key (Password) is not set, the connection is complete and a message isdisplayed. Touch [EXIT], and exit [Set Wireless Access Point].7 (When there is an Encryption key (Password))Enter the Password.≥ For details on how to enter characters, refer to page 97.≥ When the entry is complete, touch [Enter].≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set WirelessAccess Point].≥ When connecting by [Set Manually], confirm the SSID (Identification name), Authenticationmethod, Encryption type, and Encryption key (Password) of the wireless access point you areusing.1 Press Wi-Fi button on this unit.2 Touch [Wi-Fi Setup].3 Touch [Set Wireless Access Point].4 Touch the part with no display of a wirelessaccess point C.≥ For information on how to delete wireless access points orchange the search order of wireless access points, pleaserefer to [Set Wireless Access Point] on page 179.5 Touch [Set Manually].6 Touch [INPUT], then enter the SSID of thewireless access point to be connected.≥ For details on how to enter characters, refer to page 97.≥ When the entry is complete, touch [Enter].Confirming that the Wi-Fi connection is completej The status indicator of this unit is lit greenj is displayed on the screenSetting up a connection manuallyA [Delete]B [EXIT]
