- 76 -You can change the level of image contrast correction in HDR Movie Mode. (l 45, 61)The icon changes each time you touch it.(Low) # (High)≥ You cannot change the level of this effect when recording a motion picture or during PRE-REC.≥ You may not see the full effect depending on the recording conditions.This function detects the horizontal tilt of the unit, and automatically corrects it to the levelposition.Each touch of this icon switches Level Shot Function.(Normal) # (Strong) # Off≥ The icon changes when the tilt exceeds the correction range.≥ When the tilt exceeds the correction range, move the unit to the position where / isdisplayed.≥ This function's default setting is (Normal).≥ The range that this icon can be displayed correctly the slope is about 45 o to the horizontaldirection.≥ Level Shot Function is cancelled when [LEVEL GAUGE] is set to [ON]. (l 81)≥ When recording horizontal images using a tripod, attach the unit on the tripod using [LEVELGAUGE], and then set Level Shot Function to (Normal) or (Strong) before use.≥ When you switch the setting of the Level Shot Function, the screen may become blackmomentarily.≥ If you set the option to (Normal)/ (Strong), the angle of view will change.≥ This function cannot be set when recording a motion picture or during PRE-REC.HDR Effect [W580] [W580M](Low): Sets the correction level to low.(High): Sets the correction level to high.Level Shot Function(Normal): Corrects the tilt.(Strong): Strengthen tilt correction.Off: Cancel the setting./ When the tilt is corrected/ / / When the tilt is above the correction range
