- 64 -White BalanceAutomatic White Balance function may not reproduce natural colours depending on the scenes orlighting conditions. If so, you can adjust the White Balance manually.≥ Switch to Manual Mode. (l 63)1 Touch [WB].2 Touch / to select White Balance Mode.≥ Touch [WB] to select the mode.≥ To return to auto setting, set to or change the Recording Mode to the Intelligent AutoMode. (l 53)∫ To set the White Balance manually1 Select , fill the screen with a white subject.2 Touch and set the blinking .≥ When the screen turns black instantly and the displaystops flashing and then lights constantly, the setting iscomplete.≥ If the display continues flashing, the White Balancecannot be set. In this case, use other White Balance Modes.≥ When the display flashes, the Manual White Balance previously adjusted is stored.Whenever recording conditions change, re-set the White Balance.≥ When setting both the White Balance and the iris/gain, set the White Balance first.≥ is not displayed on the screen when is being set.AWBFOCUSWBSHTRIRISMNLIcon Mode/Recording conditionsAutomatic White Balance adjustmentSunny mode:Outdoors, under a clear skyCloudy mode:Outdoors, under cloudy skyIndoor mode 1:Incandescent light, video lights like in the studio, etc.Indoor mode 2:Colour fluorescent lamps, sodium lamps in gymnasiums etc.Manual adjustment mode:≥ Mercury-vapor lamps, sodium lamps, some fluorescent lights≥ Lights used for wedding receptions at hotels, stage spotlights in theaters≥ Sunrise, sunset, etc.AWBAWBFOCUSWBSHTRIRISMNLAWB AWB