- 225 -About recoveryIf faulty management information is found, the messages may appear and a repair is performed.(Repairing may take time depending on the error.)≥ is displayed when abnormal management information is detected when the scenes aredisplayed in thumbnail.≥ Use a sufficiently charged battery or the AC adaptor.≥ Depending on the condition of the data, it may not be possible to completely repair the data.≥ If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.≥ When data recorded on another device is recovered, it may not be possible to play back the dataon this unit or the other device.≥ If recovery fails, turn the unit off and on again after waiting a while. If recovery fails repeatedly,format a media on the unit. Please be aware that if a media is formatted, then all the datarecorded on the media will be erased.≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.≥ You cannot recover scenes recorded as Backup for Twin Camera and information on HighlightPlayback scenes in MP4 format.Failed to connect wireless access point/No wireless access point found≥ Check the Wi-Fi set up of your wireless access point and smartphone.≥ [Easy Connection (WPS)] can establish a connection only between two devices: this unit anda device that will connect to this unit. Check if multiple devices are trying to establish aconnection in the WPS waiting state simultaneously.≥ Read page 177 if the Wi-Fi connection cannot be established.Connection failed. Please check network settings of connected device.≥ It may be impossible to connect from some Web services such as “LUMIX CLUB” andUSTREAM. Try to reconnect after waiting a short while.≥ Read page 177 if the Wi-Fi connection cannot be established.Network disconnected.≥ When using [DLNA Play], if you do not operate the DLNA-compatible device you areconnected to for a while, it will be displayed. Check the status of the DLNA device you areconnected to.
