- 151 -∫ When configuring the home monitor settings using QR code≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in[Wi-Fi Setup] (l 170 to 173).1 Press Wi-Fi button on this unit.2 Touch [Hom.Monitor] on the Wi-Fi menu screen.3 Touch [QR code].≥ QR code is displayed on the screen of this unit.4 Turn off the Wi-Fi setting of the smartphone.5 Start up the smartphone application “Image App”.≥ (If the device is Android)When a Wi-Fi connection guidance screen is displayed, select [No].≥ (If the device is iOS)If a confirmation message for the Wi-Fi setup is displayed, select [Close].6 Enable the home monitoring setting from the menu of the smartphoneapplication “Image App”.≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home Monitor].7 Select [Set connect. dest.] of the smartphone.8 On the smartphone, select [QR code] to scan the QR code displayed on thescreen of this unit.≥ The Device ID and Password will be set. Select [OK] (on your Android device) or [Complete] (onyour iOS device).9 Touch [NEXT] on the screen of this unit.≥ Check that the message “Connecting...” has disappeared from this unit.10 On the smartphone, select [Start Home Monitor] to start home monitoring.To exit [Hom.Monitor]:Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.1 Press Wi-Fi button on this unit and touch [Hom.Monitor].2 Start up the smartphone application “Image App”.≥ When a Wi-Fi connection guidance screen is displayed, select [NO].≥ Use the smartphone to start home monitor.To exit [Hom.Monitor]:Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.≥ The message is displayed. Touch [YES] to close the indication.When using the home monitor function for the second time or later
