- 207 -≥ For information on the setup of your smartphone, refer to its operating instructions.≥ Please also refer to “If the Wi-Fi connection cannot be established”. (l 177)Wireless Twin/Multi-CameraIf the Wi-Fi connection cannot beestablished (Wireless Twin/Multi-Camera)Problem Check pointsCannot connectthis unit to thesmartphone.No image on theSub Window.≥ Check the Wi-Fi settings of the smartphone to see if the SSID of this unit isselected so that a Wi-Fi connection will be made from the smartphone tothis unit.≥ If the smartphone is connected to a wireless access point or another videocamera that supports the Wireless Twin/Multi-Camera function, afterterminating the connection, select the SSID of this unit from thesmartphone’s Wi-Fi setup menu and restart the “Image App”.≥ If you are unsure about the SSID of this unit, connecting to a smartphonedifferent from the previously connected smartphone or changed the [DirectConnection Password] setting after connecting to a smartphone, follow thesteps below to set up the connection again:(While using the Wireless Twin Camera function)1 Close the “Image App” on the smartphone.2 Press Wi-Fi button on this unit to exit the Wireless Twin Camera function.3 Press Wi-Fi button again and touch [TWIN CAMERA].4 Follow the procedure from Step 2 onwards in “Selecting this unit’s SSIDon the smartphone to set up a connection” in “When connecting asmartphone to this unit as a Wireless Sub Camera for the first time (Touse the Wireless Twin Camera function)”. (l 190)(While using the Wireless Multi-Camera function)1 Close the “Image App” on the smartphone.2 Press Wi-Fi button on this unit to exit the Wireless Multi-Camera function.3 Press Wi-Fi button again and touch [Multi Camera].4 Touch [Reset] on the device registration screen.5 Touch [YES].6 Follow the procedure from Step 2 onwards in “Selecting this unit’s SSIDon the smartphone to set up a connection” in “When connecting asmartphone to this unit as a Wireless Sub Camera for the first time (Touse the Wireless Multi-Camera function)”. (l 193)The Sub Windowimage isinterrupted.The Sub Windowimagedisappears.≥ The Sub Window image is interrupted when the Wi-Fi signal weakens. If thesignal weakens further, the Sub Window image disappears automatically.≥ Depending on the orientation of this unit and the smartphone and thedistance between them, the image may be interrupted.If the image reception is poor, close the distance and check the connectionstatus icon (l 200) at the same time. You can also point the Wi-Fitransmitter (l 9) at the smartphone.