- 150 -Using [Hom.Monitor]≥ Perform the home monitoring operation on the smartphone. (l 153)≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check thenetwork settings.≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in[Wi-Fi Setup] (l 170 to 173).1 Press Wi-Fi button on this unit.2 Touch [Hom.Monitor] on the Wi-Fi menu screen.3 Turn off the Wi-Fi setting of the smartphone.4 Start up the smartphone application “Image App”.≥ (If the device is Android TM )When a Wi-Fi connection guidance screen is displayed, select [No].≥ (If the device is iOS)If a confirmation message for the Wi-Fi setup is displayed, select [Close].5 Enable the home monitoring setting from the menu of the smartphoneapplication “Image App”.≥ Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use HomeMonitor].6 Select [Set connect. dest.] of the smartphone.7 Enter the Device ID and Password displayed on the screen of this unit intothe smartphone.≥ When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS device).≥ If you want to check the Device ID and Password after performing Step 8, on the screen of thisunit, touch [Setup] # [Home Monitor Connect].8 Touch [ENTER] on the screen of this unit.≥ Check that the message “Connecting...” has disappeared from this unit.9 On the smartphone, select [Start Home Monitor] to start home monitoring.When using the home monitor function for the first time
