- 245 -∫ Using Cyclic ModeIn this mode, the Remote Pan Tilt Cradle cycles through positions registered to the position buttonsin the desired sequence.The default sequence is as follows: [HOME] # [POS1] # [POS2] # [POS3] # [POS4] # [POS5]Touch .≥ The Remote Pan Tilt Cradle moves to the next position at approximately 5 second intervals.≥ If you touch [Stop] while the Remote Pan Tilt Cradle is moving, it will stop midway. Cyclic Modewill be deactivated.≥ If you touch [Pause] and touch another position button, Cyclic Mode will be deactivated. TheRemote Pan Tilt Cradle will move to the position of the position button you have touched.≥ In Cyclic Mode, turns of the position buttons without a registered position will be skipped. TheRemote Pan Tilt Cradle will move to the position of the next position button.Rearranging the Cyclic Mode sequence1 Touch .2 Touch .3 Touch the desired turn.≥ If you touch [Reset], the sequence will return to the default setting.4 Touch the desired position button.≥ If you touch [SKIP], the Remote Pan Tilt Cradle will skip to the position of the next turn in CyclicMode.5 Touch [ENTER].∫ Deleting positions registered to the position buttons1 Touch .2 Touch .3 Touch the position button you want to delete.≥ To delete all positions registered to the position buttons, touch [Delete all].4 Touch [YES].≥ When this unit is connected to the Remote Pan Tilt Cradle, this unit is set to Motion PictureRecording Mode. You cannot switch this unit to Still Picture Recording Mode.≥ We recommend that you make a test recording in advance to check if the image and sound arerecorded correctly.≥ The sound of the Remote Pan Tilt Cradle in operation will be recorded.≥ If you start recording after making changes to the setup of the Remote Pan Tilt Cradle, such asswitching the Remote Pan Tilt Cradle Mode or changing the location of the Remote Pan TiltCradle, it may rotate and return to its home position.≥ Once the operation starts, do not disconnect the USB cable or move the Remote Pan Tilt Cradleand this unit until the operation is finished. This may cause a malfunction or the motion picture notto be recorded correctly.≥ When you press the power button or when [ECONOMY (BATT)] (l 35) or [ECONOMY (AC)](l 35) works, this unit and the Remote Pan Tilt Cradle will turn off after the Remote Pan TiltCradle rotates and returns to its home position.≥ When the Remote Pan Tilt Cradle is in operation, neither [ECONOMY (BATT)] nor [ECONOMY(AC)] will work.
