- 156 -Playing back on a TVYou can play back the scenes and still pictures recorded with or stored in this unit on a TV.≥ The following scenes can be played back:j Scenes recorded in AVCHDj Scenes recorded as Backup for Twin Cameraj Scenes recorded in MP4/iFrame [720]j Scenes saved in MP4 (1280k720/25p) or MP4 (640k360/25p)≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in[Wi-Fi Setup] (l 170 to 173).1 Press Wi-Fi button on this unit.2 Touch [DLNA Play] on the Wi-Fi menu screen.≥ If you touch [Change AP], you can switch the wireless access point to another one that has beenregistered to this unit.≥ If you touch [CANCEL], the Wi-Fi connection is cancelled.≥ When the connection to this unit is complete, the screen of this unit turns off. To display it again,touch the screen.3 Select this unit (SSID) by the TV side.4 Perform playback operations with the TV remote control.≥ Playback operations may differ depending on the TV in use.≥ The following operations can be performed if a colour buttonis pushed.Blue/Red: Skip playback≥ Fast forward/Fast rewind playback cannot be performed.≥ You cannot perform playback operations with this unit.To exit [DLNA Play]:Touch [EXIT] or press Wi-Fi button.≥ A message is displayed. Touch [YES] to exit.≥ You cannot play back the following scenes:j Scenes recorded with [1080/50M], [1080/28M] or [iFrame] of [MP4/iFrame]j Scenes saved in MP4 (1920k1080/25p)≥ The scenes may not be played back smoothly depending on your environment, such as thenetwork condition.≥ Select the media ([SD/MEM]) and select the motion picture ([AVCHD/MP4]) or still picture([JPEG]) to play back.(Examples of operations duringmotion picture playback)A Skip playbackB StopC Playback/Pause
