2. Preparation22 For assistance, please visit http://www.panasonic.com/consumersupport2.6 Adjusting volumeBefore adjusting volume, set the operation modeto the fax mode (page 26) or the copy mode(page 43).Ringer volumeWhile the unit is idle, press {V} or {^}.L If any documents are in the documententrance, you cannot adjust the volume.Confirm that there are no documents in theentrance.To turn the ringer OFF1. Press {V} repeatedly to display “RINGEROFF= OK?”.2. Press {SET}.L When a call is received, the unit will notring and will display “INCOMING CALL”.L To turn the ringer back ON, press {^}.Ringer patternL You can select one of three ringer patterns(feature #161 on page 61).Monitor volumeWhile using the monitor, press {V} or {^}.Initial Programming2.7 Date and timeYou must set the date and time.1 Press {MENU}.SYSTEM SETUPPRESS [( )]2 Press {#}, then {1}{0}{1}.SET DATE & TIMEPRESS SET3 Press {SET}.L The cursor (|) will appear on the display.M:|01/D:01/Y:05TIME: 12:00AM4 Enter the current month/date/year byselecting 2 digits for each.Example: August 10, 2005Press {0}{8} {1}{0} {0}{5}.M:08/D:10/Y:05TIME: |12:00AM5 Enter the current hour/minute by selecting 2digits for each. Press {*} to select “AM” or“PM”.Example: 10:15PM (12 hour clock entry)1. Press {1}{0} {1}{5}.M:|08/D:10/Y:05TIME: 10:15AM2. Press {*} repeatedly to display “PM”.M:|08/D:10/Y:05TIME: 10:15PM6 Press {SET}.SETUP ITEM [ ]7 Press {MENU} to exit.Note:L The other party’s fax machine will print thedate and time on the top of each page yousend according to your unit’s date and timesetting.{SET} {V}{^}{SET} {<}{>}{MENU}{FAX}
