Panasonic KX-FLB851 Operating Instructions Manual

Also see for KX-FLB851 - All-in-One Flatbed Laser Fax: Guía de referencia rápida

Contents

8. Programmable Features62{0} “OFF” (default): The unit will not print theCaller ID list, but will keep records of theinformation for the last 30 callers.{1} “ON”: The unit will print the Caller ID listautomatically after every 30 new calls (page 38).{#}{3}{2}{2} Enabling remote operation fora telephone answering machineREMOTE TAM ACT.MODE=OFF [V^]If you are using the unit with an answeringmachine, activate this feature, and program theremote activation ID to retrieve recorded voicemessages.Important:L The remote activation ID must be thesame as the code that you programmedon the answering machine for remoteoperation. Also, it must be different fromthe fax activation code (feature #434 onpage 64).{0} “OFF” (default){1} “ON”1. Press {MENU}.2. Press {#}, then {3}{2}{2}.3. Press {1} to select “ON”.4. Press {SET}.5. Enter your ID from 1 to 5 digits, using 0–9,{*} and {#}.L The default ID is “11”.6. Press {SET}.7. Press {MENU}.{#}{3}{8}{0} Setting the recording papersize in the paper input trayPAPER SIZE #1=LETTER [V^]{1} “LETTER” (default): Letter size paper{2} “A4”: A4 size paperNote:L If you change the paper size by using{PAPER TRAY} in the copy mode (page 44),the paper size set by this feature will bechanged.{#}{3}{8}{1} Setting the recording papersize in the multi-purpose input trayPAPER SIZE #2=LETTER [V^]{1} “LETTER” (default): Letter size paper{2} “A4”: A4 size paper{3} “LEGAL”: Legal size paperNote:L If you change the paper size by using{PAPER TRAY} in the copy mode (page 44),the paper size set by this feature will bechanged.{#}{3}{8}{2} Setting the recording papersize in the optional input trayL This feature will be displayed only when theoptional input tray is installed.PAPER SIZE #3=LETTER [V^]{1} “LETTER” (default): Letter size paper{2} “A4”: A4 size paper{3} “LEGAL”: Legal size paperNote:L If you change the paper size by using{PAPER TRAY} in the copy mode (page 44),the paper size set by this feature will bechanged.{#}{4}{0}{3} Setting power save featurePOWER SAVE=15min [V^]To set the length of time before the unit entersthe power save mode.{1} “5min”: 5 minutes{2} “15min” (default): 15 minutes{3} “30min”: 30 minutes{4} “1h”: 1 hourNote:L During the power save mode, the scannerlamp remains OFF.{#}{4}{6}{3} Setting the default operationmodeDEFAULT MODE=COPY [V^]To select the default operation mode when theselected time of the mode timer (feature #464)passes.{1} “COPY” (default): Copy mode is selected asdefault.{2} “FAX”: Fax mode is selected as default.Note:L You cannot select the scan mode using thisfeature.{#}{4}{6}{4} Setting the default operationmode timerMODE TIMER=1min [V^]