Panasonic KX-FLB851 Operating Instructions Manual

Also see for KX-FLB851 - All-in-One Flatbed Laser Fax: Guía de referencia rápida

Contents

3. Fax27L To make lighter, press {V}.L To make darker, press {^}.To redial the last number1. Press {REDIAL}.2. Press {START}.L If the line is busy, the unit will automaticallyredial the number 1 time.L To cancel redialing, press {STOP}, thenpress {SET}.To predial a fax numberYou can dial the fax number first before insertingthe document. This is convenient if you need torefer to the document for the other party’s faxnumber.1. Enter the fax number.2. Insert the document.3. Press {START}.Sending from memory (Quick scan feature)You can scan the document into memory beforesending.1. Insert the document.2. Enter the fax number.3. Press {QUICK SCAN}.Reserving the fax transmission (DualAccess)You can reserve the fax transmission even whenthe unit is just receiving a fax or sending a faxfrom memory.– Up to 3 reservations when sending– Up to 4 reservations when receiving1. Insert the document during fax reception orfax memory transmission.2. Enter the fax number using the dial keypad,one-touch dial or navigator directory.3. Press {START}.L The document will be fed into the unit andscanned into memory. The unit will then sendthe data. If the document exceeds thememory capacity, transmission will becanceled. You must send the entiredocument manually.Printing a confirmation reportA confirmation report provides you with a printedrecord of transmission results. To printconfirmation reports, make sure feature #401 isactivated (page 63). For an explanation of errormessages, see page 69.Printing a journal reportA journal report provides you with a printedrecord of the 30 most recent faxes. To printmanually, see page 91. To print automaticallyafter every 30 new fax transmissions andreceptions, make sure feature #402 is activated(page 63). For an explanation of error messages,see page 69.3.2.2 Using the scanner glassBy using the scanner glass, you can send a pagefrom booklets or small sized paper that cannotbe sent with the auto document feeder.L Confirm that there are no documents inthe auto document feeder.1 If the {FAX} light is OFF, turn it ON bypressing {FAX}.2 Open the document cover (1).3 Place the document FACE DOWN on thescanner glass, matching the top edge of thedocument to the l mark on the unit.4 Close the document cover.L If the original is a thick book, do not closethe document cover.5 If necessary, change the following settingsaccording to the type of document.L To select the resolution, see page 26.L To select the contrast, see page 26.6 Dial the fax number.L To send a single page, skip to step 10.L To send multiple pages, go to the nextstep.{START}{SET}{FAX}{QUICK SCAN}1{STOP}