Panasonic KX-FLB851 Operating Instructions Manual

Also see for KX-FLB851 - All-in-One Flatbed Laser Fax: Guía de referencia rápida

Contents

8. Programmable Features618.3 Basic features{#}{1}{0}{0} Setting the quick setupQUICK SETUPPRESS SETYou can print out the quick fax setup guide andselect the desired receiving mode depending onyour situation.{1} “FAX ONLY” (default): Use only as a fax(page 34).{2} “DIST. RING”: With the Distinctive Ringservice (page 41).{3} “EXT. TAM”: With an external telephoneanswering machine (page 35).{4} “TEL ONLY”: Mostly phone calls (page 34).1. Press {MENU}.2. Press {#}, then {1}{0}{0}.3. Press {SET}.4. Press {SET} again to print the quick faxsetup guide.L If you do not wish to print it, press{STOP}.5. Press {1} to {4} to display the desiredsetting.6. Press {SET}.7. Press {MENU}.{#}{1}{0}{1} Setting the date and timeSET DATE & TIMEPRESS SETEnter the date and time using the dial keypad.See page 22 for details.{#}{1}{0}{2} Setting your logoYOUR LOGOPRESS SETEnter your logo using the dial keypad. See page23 for details.{#}{1}{0}{3} Setting your fax numberYOUR FAX NO.PRESS SETEnter your fax number using the dial keypad.See page 25 for details.{#}{1}{2}{0} Setting the dialing modeDIALING MODE=TONE [V^]{1} “PULSE”{2} “TONE” (default)See page 20 for details.{#}{1}{2}{1} Setting flash timeSET FLASH TIME=700ms [V^]The flash time depends on your telephoneexchange or host PBX.{1} “700ms” (default){2} “600ms”{3} “400ms”{4} “300ms”{5} “250ms”{6} “110ms”{7} “100ms”{8} “90ms”Note:L If the unit is connected via a PBX, PBXfunctions (transferring a call, etc.) might notwork correctly. Consult your PBX supplier forthe correct setting.{#}{1}{4}{5} Changing the LCD displaycontrastLCD CONTRAST=NORMAL [V^]{1} “NORMAL” (default): For normal contrast.{2} “DARKER”: Used when the display contrastis too light.{#}{1}{6}{1} Setting the ringer patternRINGER PATTERN=A [V^]{1} “A” (default){2} “B”{3} “C”{#}{2}{1}{0} Changing the ring setting inFAX ONLY modeFAX RING COUNTRINGS=3 [V^]To change the number of rings before the unitanswers a call in FAX ONLY mode.{1} “1”{2} “2”{3} “3” (default){4} “4”{5} “5 EXT.TAM” (External TelephoneAnswering Machine){#}{2}{1}{6} Setting the Caller ID list to printautomaticallyAUTO CALL. LISTMODE=OFF [V^]