Panasonic KX-FLB851 Operating Instructions Manual

Also see for KX-FLB851 - All-in-One Flatbed Laser Fax: Guía de referencia rápida

Contents

8. Programmable Features64company. This feature can be set up to 24 hoursin advance of the desired time.{0} “OFF” (default){1} “ON”To send a document:1. Insert the document into the auto documentfeeder.2. If necessary, change to the desired resolution(page 26) and the desired contrast (page 26).3. Press {MENU}.4. Press {#}, then {4}{1}{2}.5. Press {1} to select “ON”.6. Press {SET}.7. Enter the fax number.L To enter an item using one-touch dialfeature and navigator directory, see step 4on page 31. (When using navigatordirectory, you do not have to press{DIRECTORY} before pressing {V} or{^}.)8. Press {SET}.9. Enter the transmission start time.L Press {*} repeatedly to select “AM” or“PM”.10.Press {SET}.L The document will be fed into the unit andscanned into memory. The unit will thensend the data at the specified time.Note:L To cancel after programming, press {STOP}then {SET}.L You can also send a document using thescanner glass. Press {SET} in step 10, thenpress {START}.{#}{4}{1}{3} Setting the Error CorrectionMode (ECM)ECM SELECTIONMODE=ON [V^]This feature is available when the sending /receiving fax machines are ECM compatible.{0} “OFF”: Deactivates this feature.{1} “ON” (default): If there is an error during faxtransmission / reception, the unit will support thecommunication.{#}{4}{1}{6} Setting the connecting toneCONNECTING TONEMODE=ON [V^]If you often have trouble when sending faxes,this feature allows you to hear connecting tones:fax tone, ring back tone and busy tone. You canuse these tones to confirm the status of the otherparty’s machine.{0} “OFF”: Deactivates this feature.{1} “ON” (default): You will hear connectingtones.Note:L If the ring back tone continues, the otherparty’s machine may not be a fax machine ormay have run out of paper. Check with theother party.L The connecting tone volume cannot beadjusted.{#}{4}{3}{0} Activating the Distinctive RingfeatureDISTINCTIVE RINGMODE=OFF [V^]{0} “OFF” (default){1} “ON”See page 41 for details.{#}{4}{3}{1} Setting the ring pattern for fax(Distinctive Ring feature)FAX RING PATTERNRING=B–D [V^]{1} “A”{2} “B”{3} “C”{4} “D”{5} “B-D” (default)See page 42 for details.{#}{4}{3}{2} Receiving other sizedocumentsAUTO REDUCTIONMODE=ON [V^]To receive a fax document that is longer thanyour recording paper.{0} “OFF”: The unit will print the original size.{1} “ON” (default): The unit will fit receiveddocuments onto your recording paper.{#}{4}{3}{4} Changing the fax activationcodeFAX ACTIVATIONMODE=ON [V^]If you wish to use an extension telephone toreceive faxes, activate this feature and programthe activation code.{0} “OFF”{1} “ON” (default)1. Press {MENU}.2. Press {#}, then {4}{3}{4}.