Panasonic KX-FLB851 Operating Instructions Manual

Also see for KX-FLB851 - All-in-One Flatbed Laser Fax: Guía de referencia rápida

Contents

6. Copy436 CopyCopying6.1 Using the unit as acopy machine6.1.1 Entering the copy modeBefore copying, set the operation mode to thecopy mode.Press {COPY} to turn the {COPY} light ON.Note:L You can change the default operation mode(feature #463 on page 62) and the timerbefore returning to the default operationmode (feature #464 on page 62).L Copied documents will be stacked on theupper output tray. You can change the outputtray for copying (feature #466 on page 67).L If the {FAX AUTO ANSWER} indicator is ON,the unit can receive faxes automatically evenin the copy mode.6.2 Making a copy6.2.1 Using the auto documentfeederL Confirm that there are no documents onthe scanner glass.1 If the {COPY} light is OFF, turn it ON bypressing {COPY}.2 Set the original.1. Adjust the width of the document guides(1) to fit the actual size of the document.2. Insert the document (up to 50 pages)FACE UP into the feeder until a singlebeep is heard.3 If necessary, change the following settingsaccording to the type of document.L To select the resolution, see page 43.L To select the contrast, see page 43.L To select the input tray and paper size,see page 44.4 If necessary, enter the number of copies (upto 99).5 Press {START}.L The unit will start copying.6 After you finish copying, press {STOP} toreset the settings you set in step 3.Note:L Any document which can be sent as a fax canalso be copied and scanned (page 28).The effective scanning area is changeddepending on the setting of the paper size.L Do not open the document cover whenmaking a copy with the auto documentfeeder.To stop copyingPress {STOP}.To select the resolution1. Press {RESOLUTION}.2. Press {V} or {^} repeatedly to select thedesired resolution.– “TEXT/PHOTO”: For documentscontaining both text and photographs.– “TEXT”: For documents containing onlytext.– “PHOTO”: For documents containingphotographs, shaded drawings, etc.Note:L You can change the default resolution infeature #461 (page 66).To select the contrastYou can adjust this setting depending on thelightness or darkness of the document. 5 levels(light to dark) are available.1. Press {CONTRAST}.{COPY}1{CONTRAST}{COPY} {STOP}{START}{<}{>}{V}{^}{RESOLUTION}{PAPER TRAY}