3.2.2.29 Remote Call Forwarding SetDescriptionAllows subscribers and the Message Manager to program their extensions from a remote location in order toforward calls to another extension or to an outside telephone.There are 6 forwarding settings available:• FWD All: Forwards all incoming calls to the desired extension number.• FWD Busy: Forwards all incoming calls to the desired extension number when the line is busy.• FWD No Answer: Forwards all incoming calls to the desired extension number when there is no answer.• FWD Busy or No Answer: Forwards all incoming calls to the desired extension number when the line isbusy or there is no answer.• FWD to CO: Forwards all incoming calls to Telephone number 1 or 2 (programmed in the Mailbox Setting),or to any other number.• FWD Cancel: Cancels the forwarding setting.Conditions• In order to use the FWD to CO option, the ability to forward calls to trunks must be enabled through systemprogramming.• Extensions assigned as operators can be called by dialling [0], however, when setting this feature theextension number (not "0") must be specified.PC Programming Manual References10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service21.1 UM Configuration—[2] Class of ServiceUser Manual ReferencesSubscriber Operation1.8.5 Transferring Calls— Remote Call ForwardingManager Operation2.2.1 System Manager Features— Setting Class of Service (COS) Parameters2.2.2 Message Manager Features— Remote Call Forwarding Set3.2.2.30 Send to Fax MachineDescriptionThrough the voice mail guidance, a subscriber can send received faxes to another destination. This featurecan be used to send received faxes to a fax machine to print them out.The subscriber can send faxes to the following destinations:• A preprogrammed fax machine• A fax machine specified by entering its number via the telephone• The fax machine the subscriber is calling from (if calling from a fax machine)The subscriber can select which faxes are sent, as follows:• The current fax being "listened" to• All unprinted faxes326 Feature Guide3.2.2 Subscriber Features
