Panasonic KX-NS1000 Manual

Also see for KX-NS1000: User manual Installation manual User guide Installation manual Quick reference guide

Contents

Panasonic KX-NS1000 Manual Manual pdf 519 page image

5.6.6 Dynamic Host Configuration Protocol (DHCP) AssignmentDescriptionIt is possible to assign this PBX as a Dynamic Host Configuration Protocol (DHCP) client, allowing IP addressesto be received from a DHCP server over a LAN.Conditions• It is possible to enable this feature through system programming.NoticeIt is important to set your DHCP server to not change the IP addresses of the mother board and DSP cardsonce IP telephones are registered to the PBX. The IP telephones will not operate properly if these IPaddresses are changed.PC Programming Manual References28.1 Network Service—[1] IP Address/Ports—Basic Settings→ LAN Setting—Obtain an IP address automatically/Use the following IP address→ LAN Setting—IP Address→ DSP IP Setting—Obtain DSP IP address automatically/Use the following DSP IP addressFeature Guide 5195.6.6 Dynamic Host Configuration Protocol (DHCP) Assignment