5.5.2 PC ProgrammingDescriptionThere are three levels of authorisation for programming the PBX, where each level controls which settings theprogramming is allowed to access and change. The three levels are as follows:Level Description Number of Accounts/NetworkInstaller For dealers and system installers 1User(Administrator)For on-site managers 32User (User) For end users Up to 1512*1*1 The total number of administrator and user accounts combined cannot exceed 1512.Conditions• Each account is assigned a password that is required to log in.• Users can be added using the Add User Wizard.CAUTIONTo the Administrator or Installer regarding account passwords1. Please provide all system passwords to the customer.2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and informthe customer of the importance of the passwords, and the possible dangers if they become known toothers.3. The PBX has no passwords set initially. For security, select an installer password as soon as the PBXsystem is installed at the site.4. Change the passwords periodically.5. It is strongly recommended that passwords of 10 numbers or characters be used for maximumprotection against unauthorised access.Installation Manual References5.3 Starting Web Maintenance ConsolePC Programming Manual References2.1.1 Web Maintenance Console Accounts2.1.2 Access Levels8.2 Users—Add UserUser Manual References3.2 System Programming Using Web Maintenance Console492 Feature Guide5.5.2 PC Programming
