Conditions• The time format (12 or 24 hour) used when setting the Timed Reminder is determined by the setting of"Position of "AM/PM" in Time Stamp".® 24.4 UM Configuration—[5-4] System Parameters—Parameters—Prompt Setting— SystemGuidance—Select Language—Position of "AM/PM" in Time Stamp• A subscriber must have his or her own extension in order to use this feature.• Extensions assigned as operators can be called by dialling [0], however, when setting this feature theextension number (not "0") must be specified.PC Programming Manual References24.4 UM Configuration—[5-4] System Parameters—ParametersFeature Guide References2.24.4 Timed ReminderUser Manual ReferencesSubscriber Operation1.8.6 Other Features— Setting the Alarm (Timed Reminder)Manager Operation2.2.2 Message Manager Features— Setting the Timed Reminder3.2.2.33 Toll SaverDescriptionAllows a subscriber to check his or her mailbox from preprogrammed Caller ID numbers, the DID number orthe telephone number specified to the preprogrammed trunk group number without incurring telephonecharges.PC Programming Manual References20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Remote Call/Automatic Login/Direct Service→ Auto Login Extension→ Auto Login Extension Password Entry Requirement→ Auto Login Caller ID 1, 2→ Auto Login Caller ID Password Entry Requirement→ Auto Login DDI/DID→ Auto Login TRG No.→ Auto Login DDI/DID, TRG No. Password Entry Requirement→ Auto Login Toll Saver23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing—23.2 UM Configuration—[4-2]Service Settings—Parameters→ Delayed Answer Time for New Message (5-60 s)→ Delayed Answer Time for No New Message (5-60 s)328 Feature Guide3.2.2 Subscriber Features
