5.1.4 Time ServiceDescriptionThis PBX supports day, night, lunch, and break modes of operation. TRS/Barring can be arranged separately.The destination of incoming calls can be set differently for each mode.1.Time Service Switching ModeDay/lunch/break/night mode can be switched either automatically or manually. The switching mode canbe assigned for each tenant.The switching mode can also be changed by pressing the Time Service Switching Mode (Automatic/Manual) button. This can be performed by only an extension assigned as the manager, or preprogrammedextension on a COS basis.TypeDescriptionAutomaticThe PBX will switch mode according to the preprogrammed Time Table.ManualA manager, or preprogrammed extension on a COS basis can switchmode by dialling the feature number or pressing the Time Service button.The Unified Messaging System Manager can set the time service mode from an outside telephone.Even while in the Automatic Switching mode, day/lunch/break/night mode can be changed manually.2.Time TableEach tenant has a Time Table used for the Automatic Switching mode. The Start and/or End time of eachmode can be set for each day of the week. The Time Table numbers correspond to the tenant numbersrespectively.[Time Table Example]Day 1 startLunch startDay 2 startBreak 1 startBreak 1 end (Day restart)Night startDay 1 startLunch startDay 2 startBreak 1 startBreak 1 end (Day restart)Night start:08:0012:0013:00NONENONE16:0008:0012:0513:00NONENONE16:31:11:00NONENONENONENONE20:0011:00NONENONENONENONE20:00:MONTUE:Time ScheduleTime Table No. (Tenant No.)123400:00Time Table No.08:0011:00 12:00 13:0016:0020:00NightDay 1Day 2LunchNightNightDay 1Night08:0016:00NONENONENONE12:0008:0013:00NONENONENONE17:00:08:0012:00NONENONENONENONE08:0013:00NONENONENONENONE:…………………………………24:0008:00Day 1NightNightDay 1Day 1NightDay 1Day 11234LunchLunch…Feature Guide4475.1.4 Time Service
