Panasonic KX-T336 System Reference Manual

Also see for KX-T336: Installation instructions System reference manual Installation instructions Manual System reference manual

Contents

Panasonic KX-T336 System Reference Manual Manual pdf 205 page image

15.00 Confirmation ToneDescriptionAfter several operations the system confirms thesuccess of the operation by sending aconfirmation tone to the extension user.Multiple patterns of confirmation tone is sentwhen the following operations have beensuccessfully conducted:Confirmation tone 1 :When a function is set, indicates that the newsetting differs from the previous setting.Confirmation tone 2 :When a function is set, indicates that the newsetting is identical to the previous setting. Inaddition, the tone is sent when holding acalling party (including Consultation Hold andCall Park) or setting Call Park and whensetting or releasing Message Waiting, andsetting BGM through External Pager on andoff.Confirmation tone 3 :The tone is sent when calling by OHCA,answering by Call Pickup or by Call HoldRetrieve-Station, or when making andanswering the paging announcement, orwhen calling a doorphone or startingconference, and so on.Confirmation tone 4 :The tone is sent when converting conferenceinto a two party call.A setting can be made by programming “System-Operation”, Beep Tone for Bsy-ovr/Brg-in todetermine whether confirmation tone is to be sentor not when two party conversation issuccessfully converted into a three partyconversation (Busy Override, Conference, etc.).Confirmation tone from external pagers can beselected to be sent or not in “Trunk-Pager &Music Source”, External Pager-Tone.Refer to Section 3-B-16.00 “Tone and RingingPatterns” for the confirmation tone patterns.ProgrammingConditionsDial tone is sent after confirmation tone has beensent. However, if the Automatic Callback toStation function has been set, reorder tone issent after confirmation tone.When a function is set using a PITS with thedisplay, details of the setting appear on thedisplay while confirmation tone is sent.If any operation is performed, the message onthe display will be terminated at that time.System Programming ReferenceVT Dumb“System-Operation (1/3)”,Beep Tone for Bsy-ovr/Brg-in“Trunk-Pager & Music Source”,External Pager-Tone10-C-4.0010-C-19.009-D-1.019-F-2.003-B-24