4.00 Display-LCD4.01 Time and Date DisplayDescriptionThis is a function for a PITS provided with thedisplay to offer a display either of the presenttime or of the date and the day of the week. It isindicated on the display when the PITS is on-hook and the SP-PHONE is off.Two display modes are available: the timedisplay mode and the date display mode. Forinstance, the displays for “January 1, Friday,12:00 a.m., 1999” in each mode are as follows:In the time display mode:Jan 1 12:00 AMIn the date display mode:Jan 1, 1999 FRITo alternate the modes, dial “* ” while on-hookand SP-PHONE off.Setting the time and date is executed by “Date &Time Set Up Screen” and “Change Date & Time.”Extensions assigned to a “Class of Service” inwhich Maintenance Capability is set to “Yes” canalso set the time and date. Refer to Section 11-C-2.00 “Setting Date and Time.”ProgrammingConditionsNonePITS System Programming ReferenceSetting Date and Time 11-C-2.00System Programming ReferenceVT Dumb“Date & Time Set Up Screen”“Change Date & Time”“System-Class of Service (1/2)”,Maintenance Capability8-F-7.008-F-7.0010-C-7.007-B-4.007-F-1.009-D-4.01OperationChanging the time display mode to the datedisplay modeBe sure the telephone set is on-hook and the SP-PHONE is off.1. Dial “*.”• The message on the display ofPITS changes to the datedisplay mode.Changing the date display mode to the timedisplay mode.1. Dial “*.”• The message on the displaychanges to the time displaymode.4-A-20