Programmable SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 43Recording songs from an audiodevice for ringer tones(“Customize ring”)You can record songs (max. 5 minuteseach) from an audio device by connectingthe audio cable included with your baseunit. These songs can be assigned as theringer tone (page 42) and the ringer ID(page 26) for phone numbers stored in thephonebook. You can also use a song forthe background music during the slideshow (page 45).Important:L If a call is received while a song is beingrecorded or played back, recording orplayback stops automatically.Disconnect the audio cable from the unitto answer the call.1 Connect the audio device (such as aCD player or computer) to the unit usingthe audio cable included with your baseunit.2 {MENU} (F6) i s i {SELECT}3 “Customize ring” i {SELECT}4 “Record” i {SELECT}5 Start playing the audio device.6 Press {REC.} to start recording.7 To stop recording, press {STOP}.L To listen to the recording, select“Playback”, then press {SELECT}.L To re-record, select “Retry”, press{SELECT}, then start from step 5.8 “Save” i {SELECT}9 Enter the desired name (max. 15characters; page 22).10 {SAVE} i {OFF}11 Disconnect the audio cable from theunit.Note:L The total recording time is about 9minutes. A maximum of 20 songs can bestored. The recording time maydecrease depending on the size ofimages and songs stored in the unit.Playing back a song1 {MENU} (F6) i s i {SELECT}2 “Customize ring” i {SELECT}3 “Playback” i {SELECT}4 Select the desired song. i {PLAY}5 {STOP} i {OFF}Audio cableAudio deviceHeadphoneoutput, lineout, etc.Example: