Useful InformationFor assistance, please visit http://www.panasonic.com/phonehelp 61Error messages/iconsError messagesIf the unit detects a problem, one of the following messages is shown on the display.Display message Cause & solutionBusy L The called handset or base unit is in use.L Other users are using the line(s). Wait until the linebutton light or the line status icon goes out.L Privacy mode is on for the call you tried to join (page34).L The handset or base unit you tried to copy phonebookitems to is in use.L The handset you are calling is too far from the base unit.L The handset user is monitoring a room using thecordless camera.Camera detect L The cordless camera paged the unit, but nobodyanswered the page. After you monitor the cordlesscamera, it disappears from the display.DeniedTurn access on atdevice.L The monitor feature is turned off on the destinationhandset or base unit and the room cannot be monitored(page 35).Error!! L The unit’s registration or deregistration has failed. Movethis unit and the base unit away from the electricalappliances and try again.L The handset or base unit user tried to send phonebookitems to you but there was an error. Have the other userre-send the items to you (page 24).Error!!8 handsets havealready beenregistered.L 8 handsets have already been registered to the baseunit. The deregistered handset number is still retainedin the base unit. To register an additional handset,erase the unnecessary handset number using the baseunit. For more information, see the operatinginstructions included with your base unit.Failed L Video phone feature is not permitted on the otherparty’s unit.L The video connection failed and you will be returned tovoice call shortly. Wait until it returns to voice call.L If the “PC camera access” setting on the base unit isset to “On”, you cannot use the video phone featureduring an intercom call.