Panasonic KX-THA16 Operating Instructions Manual

Contents

Using a Cellular Phone with this UnitFor assistance, please visit http://www.panasonic.com/phonehelp 55Ringer settings for cellular callsImportant:L You must register your cellular phone tothe base unit before programming.Ringer volumeYou can change the ringer volume heardwhen a cellular call is received.1 {MENU} (F6) i s i {SELECT}2 “Ringer for cell” i {SELECT}3 “Ringer volume” i {SELECT}4 Select the desired volume. (Default:High) i {SAVE} i {OFF}Note:L When the ringer volume is set to off for acellular line, the unit does not ring forcellular calls.Ringer toneYou can change the ringer tone heardwhen a cellular call is received.1 {MENU} (F6) i s i {SELECT}2 “Ringer for cell” i {SELECT}3 “Ringer tone” i {SELECT}4 Select the desired item. (Default: “Tone3”) i {SAVE} i {OFF}Note:L If you erase a customized ring forcellular call, “Tone 3” (default) is usedinstead of that ringer tone.Transferring a cellular callCellular calls can be transferred betweenthis unit and the base unit, and betweenthis unit and another compatiblePanasonic unit (KX-THA11/KX-THA12/KX-THA16/KX-THA17).Transferring a cellular call1 During a cellular call, press{INTERCOM} to put the call on hold.2 To page the base unit, press {0}.To page the handset, enter itsextension number ({1} to {8}).L If you do not wish to announce thetransfer, skip to step 4.3 Wait for the paged party to answer.4 To complete the transfer, press {OFF}.Note:L If the paged party does not answerwithin 1 minute after you hang up, yourextension rings and the call is returnedto your phone. You can speak to thecaller again by pressing {s}.L To transfer a cellular call to theanswering system, see page 33.Answering a transferred cellular callPress {s} to answer the page.L After the paging party hangs up the call,you can take the transferred call.Note:L If the paging party hangs up before youanswer the page, “Incoming call” isdisplayed. Press {s} to take thetransferred call.