5.1 STARTING UPInstallation Manual 111Name" feature using the Owner’s Last Name when in Automated Attendant Service orVoice Mail Service.5. Port Service SettingScreen output:Incoming Call Services for all ports (Day/Night) can be defined by this setting. Defaultvalues for all ports (Day/Night) are "Automated Attendant Service (Custom 1)". To selectother incoming call services, go to "Setting Ports".6. Password SettingScreen output:You can assign the System Administrator Password and System Reset/Clear Passwordin this screen, if necessary.IMPORTANT• We strongly recommend that you set the password to 10 characters formaximum protection against hackers.• Do not carelessly reveal the password to other persons.• Please change the password periodically (for instructions, see 7.2.3 SetPassword (PASS) in 7.2 UTILITY COMMANDS.)All ports are currently set up to handle callers with standard automated atten-dant operation, day and night mode, using the Custom Service feature (Custom1). You can change the operation to standard voice mail (Custom 2) or leave itas automated attendant. If necessary, Custom 1 and Custom 2 can be modifiedunder the menu 'Program -> Service Setting -> Custom Service'.Day Mode Night ModeAuto. Attend.Auto. Attend.Auto. Attend.Auto. Attend.A: Auto. Attend., V: Voice Mail, S: Next ScreenAuto. Attend. (using Custom 1), Voice Mail (using Custom 2)Quick Setup- Port Service SettingPORT 1PORT 2Auto. Attend. Auto. Attend.PORT 3Auto. Attend. Auto. Attend.PORT 4Auto. Attend. Auto. Attend.PORT 5Auto. Attend. Auto. Attend.PORT 6Auto. Attend. Auto. Attend.PORT 7Auto. Attend. Auto. Attend.PORT 8Auto. Attend. Auto. Attend.PORT 9Auto. Attend. Auto. Attend.PORT 10Auto. Attend. Auto. Attend.PORT 11Auto. Attend. Auto. Attend.PORT 12Quick Setup-Password SettingSystem Administrator Password(Maximum 10 characters)NEW PASSWORD : =VERIFICATION : =System Reset/Clear Password(Maximum 10 characters)NEW PASSWORD : =VERIFICATION : =
