7.2 UTILITY COMMANDSInstallation Manual 1537.2.7 Saving the System Data to the Backup Device (SAVE)All system programming data and voice prompts (8 functional areas) can be saved in separatedata files. To save this data, connect a data terminal to the RS-232C port of the VPS. Save thefiles individually. Execute the SAVE command for each data file. It will require several minutesDISK ERROR: System Data Error!! Error Loading of administrator data from systemHDD.SYSTEM ERROR: 1 Administrator data error.SYSTEM ERROR: 2 Error loading of report data.SYSTEM ERROR: 3 Clock error.SYSTEM ERROR: 4 Mailbox data error.SYSTEM ERROR: 5 Message data error (1).SYSTEM ERROR: 6 Message data error (2).SYSTEM ERROR: 7 Error loading of control data.SYSTEM ERROR: 8 Error loading of voice prompt data.SYSTEM ERROR: 9 Error loading of MWL control data.SYSTEM ERROR: 10 Error loading of disk identify data.SYSTEM ERROR: 11 Error writing of VBI chain data.SYSTEM ERROR: 12 Error writing of BLK chain data.SYSTEM ERROR: 13 Error loading of user prompt modify data.SYSTEM ERROR: 14 Error loading of Class of Service data.No CO lines are active!! No Port cards present.COs are all disabled!! All Ports are malfunctioning.DPT Interface Connection is notEstablished.Ports are malfunctioning for DPT Integrationbecause telephone lines are disconnected orIntegration with PBX is not set to DPT integrationmode.Table 7-4 Error and Warning Indications During System OperationIndication MeaningDISK STORAGE SPACE IS NOWEXCEEDING80%...80 % or more of the HDD voice storagearea is used.ASCII TERMINAL program Load Error Error loading of ASCII terminal controlprogramme.VT100 program Load Error Error loading of VT100 controlprogramme.Table 7-3 Error Indications at System Startup
