B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS252 Installation ManualB6.6 System Caller Name AnnouncementUp to 120 Caller ID numbers can be assigned to announce prerecorded Caller ID caller nameswhen extension users listen to messages from the assigned numbers left in their mailbox.Extension users can also hear caller names when the VPS forwards calls from the assignednumbers to them (Caller ID Screening). The recorded caller names will also play when thecallers use the Intercom Paging features; the recorded names will be added to the end of thepage.The Caller ID Screening feature is enabled or disabled in the COS (Class of Service) settings.This feature is also enabled by selecting "Call Screening" in 4.1 Call Transfer Status in theSubscriber’s Guide.The Intercom Paging feature is enabled by selecting "Intercom Paging" in 4.1 Call TransferStatus, and/or in 4.4 Message Reception Mode in the Subscriber’s Guide.The Message Manager is responsible for recording System Caller Names.System Caller Name Announcement-EnterPosition of"AM/PM" inTime Stamp forUser 1 Prompt1. Before2. After3. 24-h(After)This parameter setting is functional only when User 1 orUser 2 Prompts are in use. This parameter specifies thefollowing:Position of"AM/PM" inTime Stamp forUser 2 Prompt1. Before—the VPS announces "AM/PM" before the time(e.g., P.M. 3:42).2. After—The VPS announces "AM/PM" after the time(e.g., 3:42 P.M.).3. 24-h—the VPS announces the time in 24-h format(e.g., 15:42).Note: When System Prompts are in use, the parameter isset to "After".To access the proper menu for System Caller Name Announcement, follow themenu path as shown:System Administration Top Menu-1-5-6To access the proper menu for System Caller Name Announcement-Enter, followthe menu path as shown:System Administration Top Menu-1-5-6-1-Caller ID List No.(1-120)Table B-26Parameter Value Range(Default)Description/Function