B5 SYSTEM ADMINISTRATION—SERVICE SETTINGSInstallation Manual 235Notes• An operator-seeking call will always reach Operator 1 first. The call will then betransferred to Operator 2 and Operator 3 sequentially, depending on systemprogramming.• "Next Operator" is not applicable for "No Answer Coverage Mode" of Operator 3.Operator’s Parameters-Night Mode-Operator 1, 2, 3Same as Day Mode.Operator’s Parameters-Lunch Mode-Operator 1, 2, 3Same as Day Mode.Operator’s Parameters-Break Mode-Operator 1, 2, 3Same as Day Mode.Busy CoverageMode1. Hold2. No AnswerCoverage3. Call Waiting4. DisconnectMessage(Hold)Specifies how to handle calls when the Operator 3extension is busy.1. Hold—Automatically places the caller on hold and theOperator 3 extension is called again.2. No Answer Coverage—Offers the option specified bythe No Answer Coverage Mode to the caller.3. Call Waiting—Signals Operator 3 when another callis waiting using the Call Waiting feature of the PBX.4. Disconnect Message—Disconnects the call afterplaying "Thank you for calling".No AnswerCoverageMode1. Caller Select2. LeaveMessage3. DisconnectMessage(Caller Select)Specifies how to handle Operator 3 calls when notanswered within the time period set by the "Operator NoAnswer Time" mode.1. Caller Select—Allows the caller to leave a messageor call another extension. (In some cases, a call toanother extension is not available. For moreinformation, see the "Note" on "Caller Select" in Table5-6 in 5.4.3 Operator’s Parameters.)2. Leave Message—Instructs the caller to leave amessage in Operator 3’s mailbox.3. Disconnect message—Disconnects the caller afterplaying "Thank you for calling".Table B-14Parameter Value Range(Default)Description/Function
