A1 SYSTEM FEATURES194 Installation ManualMessage WaitingNotification—DeviceAutomatically notifies the subscriber/Message Manager of the reception of newmessage(s) by calling either a specifiedtelephone or beeper (pager) number. Themessage will automatically play when thesubscriber/Message Manager answers a callto the telephone. When a beeper (pager) iscalled, the subscriber/Message Managermust call the VPS and access the messagefrom the mailbox. Notification can bescheduled either on or off for a maximum of 2times during any 24 h period.The subscriber/Message Manager canprogram a maximum of 3 telephones orbeepers (pagers) in sequence. The VPS willredial the number or number sequence for aspecified number of times until answered.Notification is terminated when thesubscriber/Message Manager has receivedthe message, when the last number has beencalled a specified number of times, or at thecompletion of the programmed time period.• See "Message WaitingNotification from an SLT" in3.1.4 PBX Requirements forIntegration.• See "Notification Setting" in B2SYSTEM ADMINISTRATION—MAILBOXES.• See "Authorization for MessageNotification" in Table B-7 andTable B-8 in B3 SYSTEMADMINISTRATION—SETTINGCOS (CLASS OF SERVICE)PARAMETERS.• See "Other Parameters-Message Waiting Notification" inB6.7 Other Parameters.• See C3 SETTING COS (CLASSOF SERVICE) PARAMETERS.• See D3 SETTING UPMESSAGE WAITINGNOTIFICATION.• See "Message WaitingNotification" in GLOSSARY.• See 4.8 Message WaitingNotification in the Subscriber’sGuide.Table A-1FEATURE DESCRIPTION REFERENCES
