Panasonic KX-TVP50 Installation Manual

Also see for KX-TVP50: Installation manual Getting started Subscriber's guide Getting started Operating instructions

Contents

Panasonic KX-TVP50 Installation Manual Manual pdf 33 page image

INSTALLATIONInstallation Manual 332.7 CONNECTIONS2.7.1 Connecting to the PBXThe VPS can be connected to up to 2 extension ports of the PBX. Use a 4-conductor wire forconnection with KX-TA series systems that use APT Integration, and for connection with KX-TD series systems that use DPT Integration. Use a 2-conductor wire for connection to all otherPBXs.2.7.2 Opening the Ferrite CoreInsert your finger into the opening of the ferrite core and open it as shown below:Connect a 4-conductor cable or 2-conductor cable to the VPS and run the cable through theferrite core (see the following sections). Close the ferrite core.YGRBYGRB4-Conductor CableModular ConnectionOuter PinsInner PinsB: BLACKR: REDG: GREENY: YELLOWL 5Terminal wireRJ11T 4R 3H 2RJ11