INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBXInstallation Manual 774.4.5 Live Call Screening Private/Hands-Free Mode Assignment viaStation ProgrammingThis programme assigns a VPS response for when a message is being left in a mailbox. Itdetermines whether an alert tone is sent or whether the recorded message is played through thebuilt-in speaker of the extension. The default mode is hands-free. (This is a station levelprogramme and should be done at each individual telephone.)1. Enter Station Programming:For KX-TA series PBXWith the phone on-hook, Set the MEMORY switch to "PROGRAM".(Display changes to PITS-PGM Mode.)For KX-TD series PBXa. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PITS-PGM Mode.)2. Dial the code for the mode you want this telephone to have.Hands-Free = Press #11 (for KX-TA series PBX) or [71] (for KX-TD series PBX).Private = Press #12 (for KX-TA series PBX) or [72] (for KX-TD series PBX).Screen output: Hands-Free or Private3. Press STORE.4. For KX-TA series PBXSet the MEMORY switch to "SET".For KX-TD series PBXPress the PROGRAM button or lift the handset.5. Repeat these steps for each telephone.For the KX-TD series PBX:A single-line telephone that is connected to the same extension as a proprietary telephone canalso be used to monitor an incoming message. Be sure that Live Call Screening on theconnected proprietary telephone has been activated. This feature is useful when you are usinga cordless telephone. The handset sounds an alert tone to let you know that a message is beingrecorded. To intercept the call, flash the hook.Conditions: None
