1. Press [Home].2. Press [MENU].3. Press [ ] four times to select the fifthitem from the top, press [ENTER].4. Press [ ] twice.• The second page is displayed.5. Press [ ] to select the second itemfrom the top, press [ENTER].• The language settings screen isdisplayed.6. Repeat the procedure from step 2.Making Recording SettingsYou can set the USB recording settings during calls,while idle, and during a multicast. You can also start andstop recording while idle.Note• You can make settings only when "USB Rec"in "Security Settings" is set to "ON".• The screen recorded in KX-VC2000 differs fromKX-VC1000/KX-VC1300/KX-VC1600. Fordetails about recording, refer to "Using USBRecording Features (Page 183)".To change settingsNote• You cannot change settings while recording.The unit records according to the settingsdisplayed on the settings screen whilerecording.1. Select "USB Rec Settings" and press [ENTER].• The recording settings screen is displayed.2. Use [ ][ ] to select the following items for input."Video Quality": Press [ENTER] and use [ ][ ] to select "High", "Medium" (default), or"Low"."Dual Display Rec screen": Press [ENTER] anduse [ ][ ] to select "HDMI 1" (default) or "HDMI2".Note• You can make settings only when "VideoOutput" in "Video Output" is set to "HDMI1 / HDMI 2" (Page 150)."Display Rec Status icon": Use [ ][ ] to selectwhether to display the icon that indicates the unit isrecording in the icon display area.– "ON" (default): Displays the icon.– "OFF": Does not display the icon.3. Press [G].• The dialogue box to confirm saving the settingsis displayed.Note• If you proceed to step 2 in "To start and stoprecording" without performing step 3, youcan start recording with the changedsettings. The changed settings are notsaved, and when you stop recording, thesettings return to the state before thechanges.4. Use [ ][ ] to select "Yes" and press [ENTER].• The system settings screen is displayed.To start and stop recording1. Select "USB Rec Settings" and press [ENTER].• The recording settings screen is displayed.2. Use [ ][ ] to select "USB Rec" and press[ENTER].When not recording: The dialogue box to confirmwhether to start recording is displayed. Use [ ][ ] to select "Yes" or "No" and press [ENTER]– Selecting "Yes" starts recording.– Selecting "No" does not start recording.When recording: The dialogue box to confirmwhether to stop recording is displayed. Use [ ][ ] to select "Yes" or "No" and press [ENTER]– Selecting "Yes" stops recording.– Selecting "No" does not stop recording.Note• When you stop recording, do not removethe USB memory device until the recordingcomplete dialogue box is displayed.Using MulticastRefer to "Using Multicast (Page 172)".Setting the USB Device ModeYou can switch to USB host mode and USB DeviceMode.USB Host Mode: Connect a USB memory device to theUSB jack to import or export data, update software, orperform USB recording.132 User Manual Document Version 2018-01Contacts and Settings
