• For software versions lower than 4.50, thedefault for all shortcut keys is "—".3. Press [G].• A dialogue box to confirm the saving of settingsis displayed.4. Use [ ][ ] to select "Yes" and press [ENTER].• The administrator menu screen is displayed.Setting Local Site Selection1. Select "Select local site set" and press [ENTER].• The local site selection settings screen isdisplayed.2. Use [ ][ ] to select the following items for input:"Same setting after restart": Select whether touse the same local site after restarting.– "ON": The local site settings made beforerestarting will be retained.– "OFF" (default): The local site settings madebefore restarting will not be retained."Edit Local site": Select whether to enable theediting feature on the select local site screen.– "ON" (default): The editing feature is enabled.– "OFF": The editing feature is disabled.Note• If "OFF" is selected, you cannot add, edit,or delete a local site.3. Press [G].• A dialogue box to confirm the saving of settingsis displayed.4. Use [ ][ ] to select "Yes" and press [ENTER].• The administrator menu screen is displayed.Setting Multicast TreePerform settings for the multicast function (Page 172).Exporting DataThe call log, operation log, and contacts list can besaved on a USB memory device. The saved operationlog can be used to specify the cause when problemsoccur. For details, contact your dealer.Note• A mass storage class (FAT16 or FAT32 format)compatible USB memory device can be usedwith this unit.• The following types of USB memory devicescannot be used:– U3 smart drives (USB memory devicescompatible with the U3 platform)– USB memory devices with security features– USB memory devices formatted usingNTFS– USB memory devices with multiple LUNs(Logical Unit Numbers)– USB memory devices formatted withmultiple partitions• USB memory devices are not guaranteed tofully operate. For details, contact your dealer.• To re-connect a USB memory device, makesure to fully remove the USB memory devicebefore connecting it again.• Confirm the USB memory device has sufficientfree space (at least 50 MB) before using it.1. Connect the USB memory device to the USB jackon the back of the unit (Page 23).Note• Make sure that the USB memory device isconnected correctly.2. Select "Export data" and press [ENTER].• The data export screen is displayed.3. Press [ENTER].• The data export begins.Note• While the data is being exported, do notremove the USB memory device. This coulddamage the unit or corrupt the data.156 User Manual Document Version 2018-01Contacts and Settings
