Screen DisplayHome Screen (Idle Screen)Displayed when the power is turned on. Also displayed when the [Home] button is pressed on the remotecontrol.ABDFECGMain Video Camera ImageDisplays the video from the main video camera.Unit InformationThe information displayed differs depending on the selected connection mode (Page 142).IP Mode: The connection mode, local site name, the SIP user name (if using a SIP server)/H.323 extension,H.323 name (if using a gatekeeper), LAN1 IP address, LAN2 IP address (KX-VC1600/KX-VC2000),maximum bandwidth, encryption status indication icons, Static NAT status indication icon (if using the StaticNAT feature), Local Camera Display of MCU Site icon, Profile standby icon, and Incoming Call from anon-regist. icon.NAT Traversal Mode: The connection mode, local site name, Terminal ID, maximum bandwidth, encryptionstatus indication icons, Local Camera Display of MCU Site icon, Profile standby icon, and Incoming Callfrom a non-regist. icon.IP/NAT Traversal Mode: The connection mode, local site name, Terminal ID, LAN1 IP address, LAN2 IPaddress (KX-VC1600/KX-VC2000), maximum bandwidth, encryption status indication icons, Static NATstatus indication icon (if using the Static NAT feature), Local Camera Display of MCU Site icon, Profilestandby icon, and Incoming Call from a non-regist. icon.Note• When selecting a local site (Page 113), the selected local site’s information is displayed. The localsite’s set device name is displayed. The information displayed differs depending on the local site’sconnection mode.• If the local site name, SIP user name, H.323 extension, or H.323 name is too long to display, it willbe shortened and ended with "...".Document Version 2018-01 User Manual 41Preparation
