Video Conference Call ScreenA BGFCEDOther party’s informationWhen using IP mode:When registered in the contact list: The other party’s name/IP address is displayed.When not registered in the contact list: The other party’s IP address, SIP URI (SIP user name@SIP domainname), host name (e.g., hdvc.example.com), H.323 extension, H.323 name, MCU’s conference roomnumber@IP address, or MCU’s SIP user name@IP address is displayed. If the other party uses the sameSIP domain as you, only the SIP user name, and not the SIP URI, is displayed.When using NAT Traversal Mode:• When registered in the contact list: The other party’s name/connection number is displayed.• When not registered in the contact list: The other party’s connection number is displayed.Video ImageDisplays the other party’s video, your own video, or video from the secondary video input such as acomputer display or a sub video camera.SubscreenDepending on the screen layout, your own video or the other party’s video is displayed here.DurationDisplays the duration of the current video conference call.Note• 99h59m is displayed for the duration even if the length of the video conference call exceeds 100hours.GuideDisplays operations you can perform with the remote control.Icon Display AreaNetwork Status IndicationThe number of antennas in the icon indicates differing levels of network congestion.The icon changes as follows:0 bars ( ): The network is very congested or the bandwidth is insufficient at the connection point.1 bar ( ): The network is congested.2 bars ( ): The network is slightly congested.3 bars ( ): The network is not congested.Document Version 2018-01 User Manual 45Preparation
