Changing the Setting of the Main Display (Main Siteonly)The settings of the site displayed as the main site during a call can be changed.Note• When using a KX-VC1000 that has not been expanded for 4 Point Built-in MCU support, "MainPosition set." is not displayed in the communication menu.1. Press [MENU].• The communication menu screen is displayed.2. Use [ ][ ][ ][ ] to select "Main Position set." and press [ENTER].• The main display settings dialogue box that corresponds to the MCU mode (Page 77, Page 108,Page 124) is displayed.3. Press [ENTER] and use [ ][ ] to select a switching method and then press [ENTER].When using Discussion Mode– "Local Site": Displays your own site.– "Voice Activation 1": The party (caller) with the loudest volume during a call will be automatically setas the main display.– "Voice Activation 2 (Local Site)": Your own site's image is fixed as the main display, and the party(caller) with the loudest volume during a call will be set to display priority 2.– "Voice Activation 2 (Site 1)" to "Voice Activation 2 (Site 23)": The selected site is displayed as themain display, and the site with the loudest volume at the time is displayed as display priority 2.– "Site 1" to "Site 23": Displays the selected site as the main display.– "Specified Position": Displays each site's image in the specified position.When using Presentation Mode– "Site 1" to "Site 23": Displays the selected site as the main display.– "Specified Position": Displays each sub site's image in the specified position.Note• "Specified Position" can only be selected when registering a profile (you can select any item otherthan "Specified Position" while on a video conference call, but you cannot select "SpecifiedPosition" again). For information about the displayed position when "Specified Position" isselected, refer to the section about profile registration (Page 109, Page 109).• In the following situations, the current setting is displayed as "Voice Activation 2 (-)". You canalso select the switching method.– When a site has disconnected after you set "Voice Activation 2 (Site 1)" to "Voice Activation2 (Site 23)".78 User Manual Document Version 2018-01During Video Conference Calls
