3. Select "Import data" and press [ENTER].• The data import screen is displayed.4. Use [ ][ ] to select the following items for input:"USB Directory": Press [ENTER] and use [ ][ ] to specify the directory that contains the data,from "root" (default), or "/01"–"/16"."Data": Press [ENTER] and use [ ][ ] to specifythe data that will be imported, from "All Data","Contact List", "Profile", "Configuration Data","Encryption Data", "Startup screen", or"Multicast Tree List".Note• When using a KX-VC1000 that has notbeen expanded for 4 Point Built-in MCUsupport, "Profile" is not displayed as anavailable selection.5. Press [G].• A dialogue box is displayed asking you toconfirm the import and that unit will restart afterthe import.6. Use [ ][ ] to select "Yes" and press [ENTER].• The unit restarts so that the imported data canbe applied.Note• If the image file is larger than 960 ´ 540pixels in size, the default startup screen willbe displayed.• If the image file is smaller than 960 ´ 540pixels in size, it will be displayed centeredon the screen.Activating Enhanced FeaturesYou can activate features by enhancing the unit’ssoftware. To activate the feature, you must obtain aregistration key from your dealer. First, provide yourdealer with the Activation Key No. and Registration IDwritten on the activation key, and the unit’s MPR ID. Thedealer will enter this information into the KeyManagement System and then issue you with theregistration key.To Confirm the MPR ID1. Select "Enhancement" and press [ENTER].• The software enhancement screen isdisplayed. Check the field "MPR ID".To Register the Registration KeyRegistering the registration key you acquired activatesthe enhanced features.1. Select "Enhancement" and press [ENTER].• The software enhancement screen isdisplayed.Note• In "KX-VC Series NAT TraversalService", the registration status of theKX-VC Series NAT Traversal Service isdisplayed.– "Not registered": The service is notregistered or more than 6 months havepassed since the expiration date.– "Expired": Less than 6 months havepassed since the service expirationdate. The service period can beextended.– "Expiration date is Year> (GMT)": The service has beenregistered.– "Not connected to the NAT Traversalserver": Due to problems such as notbeing connected to the network or othernetwork problems, the NAT Traversalserver could not be connected to. Oncecommunications are established withthe server, the status will automaticallychange to service registered status.• Features that have already been activatedare displayed in "Activated Features", asfollows:– "4 Point Built-in MCU": An expansionfeature is enabled for the built-in MCU.(For the KX-VC1000, 2 parties areexpanded to 4 parties. For theKX-VC1600, 6 parties are expanded to10 parties. For the KX-VC2000, 16parties are expanded to 20 or 24parties. When the KX-VC2000 isexpanded to 24 parties, "4 PointBuilt-in MCU" is displayed in 2 lines.)– "Multicast": The multicast enhancedfeature is enabled.– "Mobile Connection": The mobileconnection enhanced feature isenabled.– "HDMI Dual Monitor": HDMI2 isavailable for the KX-VC1000.– "PC Peripheral": PC Peripheral isenabled.158 User Manual Document Version 2018-01Contacts and Settings
