Connecting to other equipment104VQT0V63Playing Back Pictureson a TV Screen∫ Playing back pictures using the AVcable (supplied)• Set the aspect of the TV on the camera.(P24)• Turn the camera and the TV off.1 Connect the AV cable A(supplied) to the [AV OUT] socketon the camera.• Connect the AV cable with the [ ]mark facing the [1] mark on the[AV OUT] socket.• Hold the AV cable at B and insertstraight in or take straight out.2 Connect the AV cable to the videoinput and the audio input socketson the TV.• 1 Yellow: to the video input socket• 2 White: to the audio input socket3 Turn the TV on and select externalinput.4 Turn the camera on.• Do not use any other AV cables except thesupplied one.• The top and bottom or left and right of thepicture may be cut off slightly when it isdisplayed due to the characteristics of theTV.• Depending on the screen mode setting ofthe TV when you connect the camera to awide-screen TV or a high-definition TV,the picture may be stretched horizontallyor vertically and the top and bottom and orleft and right of the picture may be cut offwhen it is displayed. In this case, changethe screen mode setting.• Audio playback is monaural.• Read the operating instructions for the TV.• When you play back a picture vertically, itmay be blurry.• Select [TV ASPECT] to match the aspectof the TV.• You can view pictures on TVs in othercountries (regions) which use the NTSCor PAL system when you set[VIDEO OUT] in the [SETUP] menu. Evenif you set [VIDEO OUT] to [PAL], theoutput signal will still be NTSC in therecording mode.∫ Playing back pictures on a TV with anSD Memory Card slotStill pictures recorded on an SD MemoryCard can be played back on a TV with anSD Memory Card slot.• Depending on the TV model, pictures maynot be displayed on the full screen.• Motion pictures cannot be played back. Toplay back motion pictures, connect thecamera to the TV with the AV cable(supplied).• You may not be able to play backMultiMediaCards.DC IN 8.4VDIGITAL/AV OUT
