Advanced53VQT0V63Aperture-priority AESet the aperture value to a higher numberwhen you want a sharp focus background.Set the aperture value to a lower numberwhen you want a soft focus background.1 Tilt the joystick towards 3/4 toset the aperture value.2 Take a picture.• Refer to P55 for the available aperturevalues and the shutter speed.• Set the aperture value to a higher numberwhen the subject is too bright. Set theaperture value to a lower number whenthe subject is too dim.• The brightness of the screen and therecorded pictures may differ. Check thepictures using the review function orplayback mode.• The ISO sensitivity cannot be set to[AUTO]. (P77) (The ISO sensitivity isautomatically set to [ISO100] when youswitch from [AUTO] to Aperture-priorityAE or Shutter-priority AE.)• The aperture value and the shutter speeddisplayed on the screen turn red when theexposure is not adequate.Shutter-priority AEWhen you want to take a sharp picture of afast moving subject, set with a fastershutter speed. When you want to create atrail effect, set to a slower shutter speed.1 Tilt the joystick towards 3/4 toset the shutter speed.2 Take a picture.• Refer to P55 for the available aperturevalues and the shutter speed.• The brightness of the screen may differfrom the brightness of the actual pictures.Check the pictures using the reviewfunction or playback mode.• You cannot set the following items inShutter-priority AE.– Slow sync./Red-eye reduction [ ](P42)– [AUTO] in ISO sensitivity (P77) (The ISOsensitivity is automatically set to[ISO100] when you switch from [AUTO]ISO 1003F2.8F2.81/301/30F2.8F2.831/301/301/301/30F2.8F2.8
