Advanced50VQT0V63Taking Pictures usingBurst Mode1 Press the burst mode button toswitch the burst mode setting.: High speed;: Low speed;: Unlimited¢1;No display: canceled¢1 Depends on the memory size,battery power, picture size andquality (compression).2 Take a picture.• Hold down the shutter button fully toactivate the burst mode.∫ Number of pictures recorded in burstmode¢2 The burst speed is constant regardlessof the transfer speed of the card.• The number of pictures indicated is whenthe shutter speed is faster than 1/60 andthe flash is not activated.• In simple mode [ ], the settings becomeas follows. [ ] appears on the left of thescreen. (P107)– [ ENLARGE]:/Max. 7 pictures– [ 4qk6q/10k15cm]/[ E-MAIL]:/Max. 13 pictures• When the burst mode setting is set toUnlimited– You can take pictures until the capacityof the card is full.– The burst speed will become slowerhalfway. The burst speed of aMultiMediaCard becomes even slowerthan that of an SD Memory Card.However, the exact timing of thisdepends on the number of recordablepictures and the card.• The focus is fixed when the first picture istaken.• When the self-timer is used, the numberof recordable pictures in burst mode isfixed to 3.• Burst mode is not canceled when thecamera is switched off.• When auto bracket and burst mode areset simultaneously, auto bracket will beperformed.• The exposure and the white balance varydepending on the burst mode setting.When burst mode is set to [ ], they arefixed to the values set for the first picture.When the burst speed is set to [ ] or[ ], they are adjusted each time youtake a picture.• When burst mode is set, the auto reviewfunction is activated regardless of the autoreview setting. (The picture is notenlarged.) You cannot set the auto reviewfunction in the [SETUP] menu.Burst speed(pictures/second)Number of recordablepictures (pictures)3¢2max. 7 max. 132¢2approx. 2Depends on theremaining capacity of thecard.3/
