Advanced49VQT0V63Optical ImageStabilizerThis mode detects jitter and compensatesfor it.1 Press and hold the optical imagestabilizer button A until[STABILIZER] appears.2 Press 3 4 to select thestabilizer function mode and thenpress [MENU/SET].∫ Demonstration of the optical imagestabilizer (Demonstration Mode)Press 1 to display the demonstration. Afterthe demonstration ends, the screen returnsto the stabilizer function mode selectionmenu. Press 1 again if you want to exit thedemonstration before it ends. While thedemonstration is displayed, the opticalzoom is fixed to Wide (1k) and the zoomfunction cannot be activated. You alsocannot take pictures.• The stabilizer function may not beeffective in the following cases.– When there is a lot of jitter.– When the zoom magnification is high.– In digital zoom range.– When taking pictures while following amoving subject.– When the shutter speed becomesslower to take pictures indoors or in darkplaces.Be careful of camera jitter when you pressthe shutter button.• In simple mode [ ], the setting is fixed to[MODE1] and in [STARRY SKY] (P63) inscene mode it is fixed to [OFF]. Thestabilizer function mode selection menudoes not appear.• In motion picture mode [ ] or[PANNING] in scene mode, [MODE2]cannot be set.MODE1( )The stabilizer operatescontinuously and can assistduring photo composition.MODE2( )The jitter is compensated forwhen the shutter button ispressed. There is a greaterstabilizing effect.OFF( )When you want to take a picturewith jitter.STABILIZEROFFMODE2DEMO.SELECT SET MENUMENUSETMODE1
