Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual

Also see for MICRO-IMAGECHECKER A100 Series: Operating instructions Operating instructions

Contents

A200/A100 HardwarePart Names and Functions1 − 61.2 A Series CameraAbout the DIP Switches− Gain adjustmentDIP switch 5: ON = 0 to +10dB range gain adjustment volume.OFF = 0dB− Potentiometer: When DIP−SW5 is ON, turning this potentiometer to the rightincreases the brightness of the image captured by the camera.− Camera mode switchDIP switch 6: ON = frame modeOFF = field mode− OtherDIP switches 1 to 4, 7, 8: Normally OFF− Settings when shippedDIP switch 5 = ON, VOL +10dB. All others are OFF.Using the Camera Correctly− When you connect more than one camera to an A200 controller, be sure the camerasare of the same type.− When you connect only one camera to an A200 controller, plug it into the CameraA jack.− Do not use products other than those specified by us for camera cables or cameraextension cables.− Do not connect multiple camera cables or camera extension cables to one anotherto make an extension.− Do not touch the camera’s CCD elements or lens surface. Also, be sure to cap thecamera when storing it in order to prevent smudges on the CCD elements or lenssurface.− Change the DIP switch positions in accordance with the camera mode.− Be very certain not to change the DIP switch settings of other DIP switches.