Installation and WiringA200/A100 Hardware2 − 32.1 Connecting Peripherals2.1 Connecting PeripheralsBe sure to connect peripherals to the controller only when the controller power is OFF.24 V DC Monitor−CableCamera−CableGroundKeypad*Only one camera can be connected to the A100.Using Peripherals Correctly− Do not connect products not specified by us to the controller.− Be sure to connect peripherals only when the controller power is turned OFF.Otherwise, damage could result.− When you connect multiple cameras to an A200 controller be sure the cameras areof the same type.− When you connect only one camera to an A200 controller plug it in to the CameraA jack.− Avoid unintentional cable detachment by arranging the wiring so there is no weightor load on the cable connector joints.− When unplugging a connector, be sure to grasp the connector part itself and avoidexerting unnecessary force on the cable. Also, avoid touching or allowing water tocome in contact with the connector pins.