Installation and WiringA200/A100 Hardware2 − 92.5 View range and Lens Selection Tables2.5.2 ANM832 Standard CameraLensView range (mm)ANM8850 (1)f=50mmANB847Lf=50mmANB846NLANM88251f=25mmANB845NLANM88161 (*1)f=16mmANB843Lf=8.5mmResolutionμm/pixelVerticalviewrangeHorizontalviewrangea b a b a b a b a b Vertical Horizontal1 1.1 59 183 48 183 2.1 2.12 2.1 73 94 62 94 4.2 4.23 3.2 87 64 76 64 6.3 6.34 4.3 101 49 90 49 8.3 8.35 5.3 115 41 104 41 31 23 10.4 10.47.5 8.0 150 29 139 29 49 17 15.6 15.610 10.7 186 23 175 23 66 14 31 11 20.8 20.912.5 13.3 221 19 210 19 84 12 42 10 26.0 26.115 16.0 256 17 245 17 101 11 53 9 31.3 31.320 21.4 326 14 315 14 137 9 76 8 30 6.5 41.7 41.730 32.0 467 11 456 11 207 8 121 7 54 6 62.5 62.640 42.7 608 9 597 9 277 7 166 6.5 78 5.5 83.3 83.450 53.4 348 6.5 211 6 102 5.5 104.2 104.375 80.1 524 6 323 5.5 162 5.5 156.3 156.4100 106.8 700 6 436 5.5 221 5.5 208.3 208.6150 160.2 661 5.5 341 5 312.5 312.9200 213.6 886 5 461 5 416.7 417.2250 267.0 580 5 520.8 521.5300 320.4 625.0 625.8Vertical view Horizontal viewa: Distance between the frontof the lens and the objectb: Adapter ringLensMetal fittinga: distance from end of lens to object.b: thickness of adapter ring.NoteThe view range − lens table is designed primarily for use as afocusing guide. Use the camera itself to make the finaladjustments to focus, view range, distance to work, resolutionand any other settings which need to be made before running thesystem.Unless otherwise noted, the focus values in the chart are allinfinity.*1: a = +4mm