Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual

Also see for MICRO-IMAGECHECKER A100 Series: Operating instructions Operating instructions

Contents

A200/A100 HardwareGeneral Specifications7 − 67.4 Double−Speed Random Camera ANM8317.4 Double−Speed Random Camera ANM831Item SpecificationImaging element Readout of all pixels (interline transfer protocol)1/3 inch CCD fixed photo elementsEffective pixels Horizontal 659 pixels × vertical 494 pixels; pixel size = Square PixelScanning method Non−interlaced mode (1/60s)2:1 interlaced (1/120s × 2)Switched mode (using DIP switches on camera back)Shutter speed OFF (1/120), 1/200, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, and 1/20000s(Set by the controller)Gain switch and adjustment Gain switch = 0dB or gain up (DIP switch)Gain up volume is adjusted within the range of 0 to +10dB using the finetuning knob on the back of the camera.Lens mount C mountRated voltage / Allowable voltagerange12 V DC (supplied from the controller) /10.8 to 13.2 V DCRated current consumption 130mAOperating ambient temperature Performance guarantee temperature = 0 to 40°C (without icing and dewcondensation)Operating = – 10 to 50°C (without icing and dew condensation)Storage ambient temperature – 30 to 60°C (avoid ice and condensation)Operating ambient humidity Performance guarantee ambient humidity = 50 to 70%RH (without icingand dew condensation at 25°C)Operating ambient humidity = 30 to 70%RH (without icing and dewcondensation at 25°C)Storage ambient humidity 25 to 90%RH or less (without icing and dew condensation at 25°C)Vibration resistance 10 to 55 Hz, 1 vibration per minute, vibration width 1.2 mm, 30 minuteseach in X, Y, Z directions.Shock resistance 700m/s 2, three times each in X, Y and Z directions.Weight around 70g (excluding cables, lens, and camera mounting hardware)