Panasonic NV-GS40 Operating Instructions Manual

Contents

Before Use-13-2 Adjust by turning the Eyepiece CorrectorKnob (37).ª Using the LCD MonitorWith the LCD Monitor open, you can also recordthe picture while watching it.1 Put a finger on the [OPEN4] Knob (1) andpull the LCD Monitor (2) out about 90o in thedirection of the arrow.≥The Viewfinder goes off.2 Adjust the LCD Monitor angle according tothe desired recording angle.≥The LCD Monitor can rotate a maximum of180o 1 from the vertical position to theupward direction and a maximum of 90o 2 tothe downward direction. Forcefully rotatingthe LCD Monitor beyond these ranges willdamage the Movie Camera.Closing the LCD MonitorPush the LCD Monitor until it is securely locked.≥Make sure the Card Slot Cover is closed.ª Adjusting Brightness and ColourLevelWhen [LCD/EVF SET] on the [DISPLAY SETUP]Sub-Menu is set to [YES], the following items aredisplayed.12:30:4515.10.200312:30:4515.10.200312:30:4515.10.200312:30:4515.10.2003(37)(2)(1)290o1180oLCD/EVF SETPRESS MENU TO RETURNLCD BRIGHTNESS[-]||||----[+]LCD COLOUR LEVEL[-]||||----[+]EVF BRIGHTNESS[-]||||----[+]LCD Brightness [LCD BRIGHTNESS]It adjusts the brightness of the image on the LCDscreen.LCD Colour Level [LCD COLOUR LEVEL]It adjusts the colour saturation of the image onthe LCD screen.Brightness of the Viewfinder[EVF BRIGHTNESS]It adjusts the brightness of the image in theViewfinder.To AdjustPress the [PUSH] Dial and select the item to beadjusted, and then turn the [PUSH] Dial to raiseor lower the number of vertical bars in the BarIndication.≥A larger number of vertical bars indicatesstronger brightness or colour saturation.To Increase the Brightness of the Entire LCDMonitorSet the [LCD MODE] on the [DISPLAY SETUP]Sub-Menu to [BRIGHT].≥These adjustments do not affect the recordedimages.≥For other notes concerning this item, see -64-.Using the Menu ScreenTo facilitate the selection of a desired function orsetup, this Movie Camera displays variousfunction setups on Menus.1 Press the [MENU] Button (46).≥The Menu corresponding to the Modeselected by using the [OFF/ON/MODE]Switch (43) is displayed.2 Turn the [PUSH] Dial (38) to select a desiredSub-Menu.≥Turn the [PUSH] Dial (38) to display thehighlightened item.3 Press the [PUSH] Dial (38) to display theselected Sub-Menu.4 Turn the [PUSH] Dial (38) to select the itemto be set.MENUPUSHMF/VOL/JOGWB/SHUTTER/IRIS/(46) (38)(43)OFFONMODE